Blue Screen Loop and Windows Will Not Boot Copy Your Dump Files from WinRE
When Windows crashes before the desktop, most people jump straight to reset or reinstall - and destroy the evidence. WinRE lets you rescue the minidump files first, diagnose on a working PC, and often fix the loop with the cause known instead of guessed.
Watch the full method in the video - identifying a blue screen cause, step-by-step
A boot loop feels like the end, but your crash files are still sitting on the drive, readable without Windows ever starting. The Windows Recovery Environment (WinRE) includes a Command Prompt that can copy C:\Windows\Minidump to a USB stick in two minutes. Take those dumps to any working PC, read them with BlueScreenView, and you will know whether you are facing a bad driver (fixable in place) or failing hardware (different conversation). Rescue evidence first, repair second - that order is the whole point of this guide.
WinRE Command Prompt - copying the dumps (example)
Example only - your Windows drive letter inside WinRE is often D: or E:, not C:. Find it with dir before copying.
Example WinRE session. Drive letters shift inside the recovery environment - always confirm which letter holds your Windows folder.
1
Reach WinRE When Windows Will Not Boot
Windows offers the recovery environment automatically after repeated failed boots - help it along if needed.
Power on, and when the Windows logo or spinning dots appear, hold the power button to force off
Repeat three times - on the next boot Windows shows Preparing Automatic Repair, then a recovery screen
Choose Advanced options - you are now in WinRE
If you have a Windows install USB, booting from it and choosing Repair your computer reaches the same place
2
Copy the Minidump Files to a USB Stick
Plug in a USB stick before you start, then use the Command Prompt.
In WinRE choose Troubleshoot, Advanced options, Command Prompt
Find your Windows drive: type dir C:\Windows, then try D: and E: the same way - inside WinRE the letter is often not C
Note your USB stick's letter the same way (look for a drive with little on it)
Copy the evidence: copy D:\Windows\Minidump\*.dmp E:\ - adjust both letters to your findings
Also copy any large MEMORY.DMP in D:\Windows if present - it holds even more detail
3
Read the Rescued Dumps on a Working PC
Take the USB stick to any working Windows PC.
Run BlueScreenView, open Options, Advanced Options, and point it at the folder holding your copied dumps
Read the pattern exactly as in the normal method - same driver repeatedly, or scattered codes and files
A single third-party driver named in every loop crash means the loop is very likely fixable without reinstalling
A scattered pattern plus a loop can mean RAM or a dying drive - the drive can also be health-checked from WinRE or a bootable tool
4
Fix the Loop with the Cause Known
Now choose the repair that matches your evidence, from inside WinRE's Advanced options.
Bad driver named: use System Restore to a point before that driver arrived, or boot Safe Mode (Startup Settings) and uninstall it there
After an update: use Uninstall Updates - remove the latest quality update first
Startup Repair is worth one try for boot-file damage, though it rarely fixes driver loops
Only if these fail, use Reset this PC - Keep my files, knowing your dumps and diagnosis told you it was truly necessary
If the drive is BitLocker encrypted, WinRE will ask for the 48-digit recovery key before opening the Command Prompt. Without that key the files cannot be copied - this is encryption working as designed, not a fault.
Watch the Complete Video Guide
The full blue screen identification method - dump files, stop codes and the fix - shown live, step-by-step.
Either dumps were disabled in settings, or the crashes happen so early that Windows cannot write them, or the drive itself is failing. Very early loop crashes with no dumps at all push suspicion towards hardware - RAM seating, drive health, or power.
Startup Repair says it could not repair my PC. Is my data gone?
No - Startup Repair only attempts boot fixes and changes nothing about your files. Your documents are still on the drive and can be copied out with the same WinRE Command Prompt (copy your Users folder to USB) before any reset.
Can I read a MEMORY.DMP file the same way?
Yes - BlueScreenView can open it via Options, Advanced Options, though it is large and slower to load. The small minidumps are usually enough; MEMORY.DMP helps in stubborn cases where minidumps look empty or generic.
This guide is based on the Technical Anshu blue screen video - stuck on any step, ask in the video comments and you will get an answer.